Data Center Electrical Calculator
Motor Starting Voltage Dip Calculator
Estimate the voltage dip at the point of common coupling during motor starting for DOL, star-delta, soft-starter and VFD starting methods.
Design Inputs
Results
Starting kVA
562.22 kVA
Estimated Voltage Dip
3.61%
Within the commonly-cited 10% general-purpose limit.
%Dip ≈ Starting kVA ÷ (Starting kVA + Source Fault Level), a simplified point-of-common-coupling estimate that ignores motor and cable impedance between the source and the motor. Acceptable dip limits vary by standard/utility (commonly 10–15% general purpose, much tighter for UPS-fed or sensitive loads) — confirm against the applicable code and the actual source impedance.
Explore more calculators
Conductor Sizing
Free HV (HT) and LV cable sizing calculator, plus busduct and earth cable size calculation. Four IEC/IS-aligned tools in one place, each checking ampacity, voltage drop and short-circuit withstand rather than giving a rough estimate.
Transformer Sizing
Size a power transformer to the nearest standard IEC 60076 kVA rating from connected load, power factor and spare capacity, with primary and secondary full-load current.
UPS Selection
Size a UPS system across Single, N, N+1, Distributed, 2N and 2(N+1) redundancy philosophies, with losses, battery charging load, and standard kVA rating libraries.
Generator (DG) Sizing
Size a standby diesel generator set per ISO 8528, sized on the larger of steady-state running load and the voltage-dip-limited starting requirement of the largest motor.